Micro Gear Pump

The micro gear pump is a small displacement external gear pump. The housing is precision machined from 304 stainless steel, the gear is made from PEEK, and the dynamic seal at the shaft end is made of fluororubber skeleton shaft seal.

Product features:

The model is small in size and compact in structure.
PEEK gears and bushings are resistant to organic solvents, corrosion, high temperature, and high strength and friction resistance.
High pressure and large flow
The flow rate is fixed and cannot be adjusted
Intermittent work, no continuous work
The brush motor can work for about 5,000 hours, and the normal service life is 2-3 years.
Safety and environmental protection levels can meet international standards (CCC, ROHS, CE)

Specification

Name	Specification
Model	WSFSGE2DCI51-24-30W
Displacement	0.66ml/rev
Rate of flow	2L/min
Pressure	5 bar
Motor	DC brushed motor
Rotating speed	3000rpm
Motor Power	30W
Rated voltage	24V
Rated current	1.6A
Import and export direction	Both sides of the pump body
Import and export thread	G1/8
Temperature resistance range	-10℃ ~ 50℃
Noise	80DB
Material	Pump body 304, sealing ring PTFE, gear PEEK
lifespan	5000-8000H
Drive mode	none
Viscosity range	0-3000CP

Precautions

1. It is strictly prohibited to transport or clean solvents and materials containing dichloromethane, tetrahydrofuran, butyllithium, and dimethylacetamide.
2. Before disassembling the pump, please cut off the power supply to the motor and completely release the pressure in the pump.
3. Do not change the components of the pump and motor. Any changes may reduce the pressure rating of the pump and cause harm to people.
4. A sealing ring, sealant or raw material tape must be placed on the inlet and outlet joints of the pump, especially at the inlet. If there is air leakage, the liquid will not be sucked, and the noise will even increase.
5. It is prohibited to transport media containing particles, and it is prohibited to run idling/dry.